AIMPLAS designs a new interchangeable filter mask against COVID-19

AIMPLAS designs a new interchangeable filter mask against COVID-19

Given the health emergency situation generated by the COVID-19 pandemic, AIMPLAS, the Technological Institute of Plastics, makes available to the different health administrations and authorities both its knowledge of materials and its ability to design, prototype, manufacture and material resources to facilitate the supply of personal protective equipment (PPE).

Specifically, AIMPLAS is carrying out a feasibility study to be able to manufacture masks with interchangeable filters through injection processes. For this, AIMPLAS has already made its own design and contacts have been established with companies and vocational training centers that can manufacture the molds, such as Vicedo and Escuelas San José. In addition, AIMPLAS technical personnel are cutting and supplying transparent PET sheets from a coil donated by Manufacturas Arplast to facilitate the manufacture of protective visors and distribution to hospitals, while the Madrid hospitals have been provided with the supplier contact for the supply of PET sheets.

On the other hand, and as members of the National Federation of Innovative Business Groups and Clusters platform, the company Elix Polymers has requested the technology center to collaborate in the production of 3D ABS filaments for the printing of different types of materials such as valves, masks , etc.

Regarding its material resources, and due to the shortage of protection material for health personnel, AIMPLAS has donated a total of 5000 cuffs, 100 disposable gowns, 16 masks, 15 Tyvek suits, 15 liters of gel to health centers in Paterna. sanitizer and 10 glasses. In addition, stocks of gloves have been reported and made available to the Ministry.

Through the different groups that have been created in Telegram to manufacture protective equipment through additive manufacturing or 3D printing, AIMPLAS is carrying out material advisory tasks. Also through this platform, AIMPLAS has made available to the different Valencian hospitals its 3D printing capacity of protective visors and they are sent to the same new units every day. In addition, the center is participating with its advice in Reesistenciateam, a virtual community made up of more than 1,800 people who are developing respirators, protective screens, masks, as well as valves, all using 3D printing technology.

Publicado en Others, Innovation


3D printing solutions from HP and its partners against COVID-19

3D printing solutions from HP and its partners against COVID-19

HP and its global community of digital manufacturers are mobilizing their 3D printing equipment, technology, expertise and production capacity to develop critical parts to combat the COVID-19 pandemic. More than 1,000 3D printed parts have already been delivered to local hospitals.

HP 3D R&D centers in Barcelona, ​​Spain; Corvallis, Oregon; San Diego, California; and Vancouver, Washington are collaborating with partners around the world in a coordinated effort to increase production and meet the most pressing needs.

Initial applications being validated and finalized for industrial production include face masks, face shields, face mask adjusters, nasal swabs, hands-free door openers, and respirator parts. HP is also coordinating with government, healthcare and industry agencies in numerous countries to ensure a synchronized and effective approach.

HP's global network of manufacturing partners works to ensure that hospitals in all regions of the world can access 3D printed medical parts to the appropriate quality and safety standards.

Some of the first applications that are being validated and produced include:

· Hands-free door opener: Door handles are among the most infected objects in homes, hospitals, factories, and nursing homes. This adapter allows for an easier, healthier opening with one elbow to help slow the spread of the virus.

· Mask Adjuster: Many hospital employees must wear masks for long periods of time. This closure helps improve comfort and ease associated ear pain. covi 2· Face shields: Face shields are one of the most necessary personal protection items. The brackets to hold the protector and adjust it comfortably to the user are a critical component.

There are many more applications that are in the testing and validation phase and are expected to start producing soon, among others:

· Field Ventilator: 3D printed parts for a mechanical bag valve (BVM) mask, designed as a short-term emergency ventilation device in patients affected by CONVID-19. This simplified design allows a robust and less complex device, facilitating its rapid production and assembly.

· FFP3 Face Masks: Effective protective equipment is required for medical providers to treat the expected volume of COVID-19 patients. HP is validating several hospital-grade face masks and hopes to make them available shortly.

Part designs available to the public

HP and its partners will make validated design files for many non-complex assembly parts available to the general public on this website for download. 3D designers and innovators who want to join the battle against COVID-19 will be able to contribute new applications and ideas on this website.

Publicado en Others, Innovation


HP, Leitat and Seat develop the first industrializable field respirator

HP, Leitat and Seat develop the first industrializable field respirator

HP, Leitat (Tecnio), Seat and the Free Zone Consortium (CZFB), together with CatSalut, through the Terrassa Health Consortium (CST) and the Hospital Parc Taulí de Sabadell -Barcelona, Spain-, have managed to create the first industrializable field respirator prepared to support hospitals and ICUs. This is encouraging news in an environment where there was concern about a shortage of medical supplies to combat the COVID-19 virus.

Leitat has designed a field respirator manufactured using 3D technology that is industrially scalable, allowing a production capacity of between 50 and 100 units per day. Magí Galindo, senior engineer at Leitat, has carried out the design, which has been medically validated by Dr. Lluís Blanch, director of Innovation at the Parc Taulí Hospital in Sabadell, an expert in mechanical ventilation.

In this field respirator called Leitat 1, its design and components have been simplified to the maximum in order to develop a useful but less complex medical device, to enable more agile production and assembly.

Leitat is a Technological Center that develops more than 215 projects in the fields of biotechnology, health, advanced materials, industrial chemistry, renewable energy and new production processes, including R & D & i solutions in packaging. Enviar comentarios

Publicado en Others, Innovation


Billebeino's innovative e-commerce packaging

Billebeino's innovative e-commerce packaging

Digitally printed packaging made by Adara Pakkaus Oy, and printed onto Metsä Board’s white kraftliner, changes prints according to the collection's theme. Digital printing allows for variable printed patterns while optimising order quantities. The high brightness of the kraftliner gives stunning colour reproduction. It is a strong, yet lightweight and recyclable material, making it a sustainable choice.
Billebeino is a company founded in 2015 by Juhani Putkonen and Ville Leino. The company is named after Ville Leino. When he played ice hockey in the NHL, his name was often changed to Bille Beino.
Adara's digitally printed E-wave kits use MetsäBoard Classic WKL (135 g/m2) on the surface and MetsäBoard Natural WKL Bright (120 g/m2) uncoated white kraftliner on the back.

Publicado en Others, Innovation


Eco-responsible Muvit accessories for mobile devices

Eco-responsible Muvit accessories for mobile devices

Ascendeo Iberia, a leading company in the distribution of accessories for mobile devices, has as its main objective for 2022 that 100% of its Muvit brand products are eco-responsible. At the beginning of this project, at the end of 2019, it introduced Muvit's eco-responsible mobile cases to the Spanish market. These are biodegradable or recycled mobile protective cases, where the packaging is also ‘zero plastic’.
The Bambootek range is entirely inspired by nature, made with natural materials such as bamboo fiber and corn starch, is 100% biodegradable, has a 100% compostable rating and is as flexible and shock resistant as a traditional shell. It is available in 4 colors.
The Recycletek range is inspired by nature, produced only from ground recycled plastic and converted into granules, ready to be re-injected into the production of new housings with a complex and innovative process. It is available in black and transparent.
To complete the eco-responsible process of these products, the packaging of both is "zero plastic", made of 100% cardboard, without glues or varnishes and with ecological ink.

Publicado en Others, Innovation

[12 3 4 5  >>  




Pau Claris, 138 1º 3ª
08009 - Barcelona


Phone: +34 93 434 21 21
FAX: +34 93 418 90 41
Contact by email

Press releases

Send us here your press releases for its publication


5,000 issues + 1,200 issues for trade fairs

Copyright © 2020 NewsPackaging. All rights reserved.Política de privacidad y aviso legal - Política de cookies